SSANGYONG Rexton Y200 Manual page 306

1B3-38 DIESEL ENGINE MECHANICAL
Installation Procedure
1. Replace the cylinder head gasket.
YAD1BCE0
2. Install the cylinder head onto the crankcase.
Notice: Align the cylinder head holes with the guide
pins.
YAD1BCF0
3. Measure the length(L) of cylinder head bolts.
Notice: If the max. length is exceeded, replace
the bolts.
Thread Dia.
M10
M10
M10
YAD1BBE0
4. Coat the head contact surface of bolts and thread
with oil and insert them as shown.
- Cylinder head bolts arrangement
Bore
1 .............................................. M10 × 80
2 .............................................. M10 × 102
3 .............................................. M10 × 115
4 .............................................. M 8 × 50
5 .............................................. M 8 × 80
YAD1BCG0
Length (L) when New Max. Limit(L)
80 mm
102 mm 104 mm
115 mm 117 mm
82 mm
SSANGYONG Y200