SSANGYONG Rexton Y200 Manual page 104

3 Bolt
4 Amarture
6 Nut (M20 x 1.5)
12 Seal Cover
SSANGYONG Y200
YAD1B670
YAD1B590
YAD1B0E0
13 Camshaft Sprocket
18 Control Piston
22 Intake Camshaft
M162 ENGINE MECHANICAL 1B1-63
Removal & Installation Procedure
1. Turn the crankshaft to the direction of engine
rotation and position the no.1 cylinder piston at
TDC which the camshaft is positioned at OT.
2. Remove the cylinder head front cover. Refer to
"Cylinder Head Front Cover" in this section.
3. Paint the alignment marks (arrows) on the intake
and exhaust camshaft sprocket and the timing
chain.
4. Unscrew the bolt (3) from the armature (4) and
remove the armature.
Installation Notice
Tightening Torque
5. Unscrew the nut (6) and remove the ring and seal
cover (11).
Installation Notice
Tightening Torque
35 N•m (26 lb-ft)
60 - 70 N•m
(44 - 52 lb-ft)