Crankshaft Rear Radial Seal - SSANGYONG Rexton Y200 Manual

1B2-40 M161 ENGINE MECHANICAL
Preceding Work: Removal of flywheel or drive plate
1 Special Tool
2 Special Tool

CRANKSHAFT REAR RADIAL SEAL

YAD1B850
3 Crankshaft Rear Seal
Tools Required
601 589 03 43 00 Crankshaft Rear Seal Installer
Replacement Procedure
1. Remove the radial seal with a screw driver.
Notice: Use a clean cloth not to damage the radial
seal mounting hole and the crankshaft.
2. Install the special tool (2) to the crankshaft.
3. Apply the engine oil on the special tool (2).
Notice: Do not use the grease.
4. Install the radial seal on the inner parts assembler.
5. Press in the special tool (1) until the radial seal is
stopped.
6. Check for leaks while operating the engine..
YAD1B840
SSANGYONG Y200