1B3-48 DIESEL ENGINE MECHANICAL
Installation Procedure
Notice: In case the prechambers are reused,
inspect the prechambers thoroughly, if the ball
pin by heat and fire is broken, it can not be used.
1. Clean the sealing surface of the prechamber.
2. Insert the prechamber into the cylinder head at
the same time aligning the cam on the collar of
the prechambers with the slots in the cylinder
head.
Installation Notice
Thickness of Spacer Ring
YAD1BD40
If the spacer rings are fitted to the prechambers,
the spacer rings should be replaced with rings of
the same thickness.
3. Coat the threaded ring with oil and assemble the
ring by using the serration wrench 603 589 00 09
00.
Installation Notice
Tightening Torque
0.3, 0.6, 1.0 mm
130 N•m (96 lb-ft)
SSANGYONG Y200