Ignition Coil - SSANGYONG Rexton Y200 Manual

1F1-10 M162 ENGINE CONTROLS
1 Control Cable Connection
2 Ignition Cable
3 Spark Plug Connector
4 Coupling Plug
The Electronic Ignition (EI) system ignition coil is located on the cylinder head cover. The double ended coils
receive the signal for the Engine Control Module (ECM) which controls the spark advance.
Each EI system ignition coil provides the high voltage to two spark plugs simultaneously;
T1/1: cylinder 2 and 5
T1/2: cylinder 3 and 4
T1/3: cylinder 1 and 6
The EI system ignition coil is not serviceable and must be replaced as an assembly.

IGNITION COIL

5a, 5b Secondary Voltage Connection
E Iron Core
L1 Secondary Ignition Coil
L2 Primary Ignition Coil
YAD1F090
SSANGYONG Y200