SSANGYONG Rexton Y200 Manual page 662

1F3-38 DIESEL ENGINE CONTROLS
0 T
10 20 30 40
YAD1BC10
YAD1FBP0
YAD1FBQ0
YAD1FBR0
Tools Required
617 589 08 21 00 Position Sensor
Adjustment Procedure
1. Position the No. 1 cylinder at ATDC 15°
Notice: Do not rotate the engine in opposite
direction of engine rotation.
2. Remove the bolt (2) at the supporting bracket.
Installation Notice
Tightening Torque
3. Remove the bolt (4) at the timing case cover.
Installation Notice
Tightening Torque
4. Turn the adjusting screw (1) until both lamps 'A',
'B' on the position sensor 617 589 08 21 00 light
up.
To the right
To the left
Notice: If the adjustment range is not adequate,
remove the injection pump and reinstall.
5. After adjusting, retighten all the bolt to the
specified torque.
23 N•m (17 lb-ft)
23 N•m (17 lb-ft)
Start of Delievery Retarded
Star of Delivery Advanced
SSANGYONG Y200