SSANGYONG Rexton Y200 Manual page 712

SSANGYONG Y200
Installation Procedure
1. Compress the coil spring as the specified torque
and install the related components. And then
tighten the lock nut.
Installation Notice
Length at compression
Tightening torque of
Notice: Be careful to the installation direction for
installing the coil spring.
YAD2C320
Note: When it's difficult to tighten the nut as
specified torque, fix the length from upper lock
nut to bolt end to 23 ~ 24 mm.
2. Check the coil spring installation.
•
Check the installation direction of the coil
spring.
•
Verify that the coil spring is installed onto the
spring sheet correctly.
YAD2C330
FRONT SUSPENSION 2C-17
334 N•m
25 - 40 N•m
lock nut (18 - 30 lb-ft)