SSANGYONG Rexton Y200 Manual page 94

SSANGYONG Y200
M162 ENGINE MECHANICAL 1B1-53
Removal Procedure
1. Unscrew the connecting rod bearing cap bolt (3)
and remove the cap.
2. Remove the connecting rod and the piston upward.
Notice: Make sure that the bearing cap and shell
are not changed each other.
3. Remove the snap ring (5) and pull out the piston
pin (6).
Notice: Remove the snap ring using a clean cloth
as shown in the right picture so that the piston,
piston ring, and the snap ring don't get damaged.
YAD1B2Q0