Description And Operation; 4D-2 Parking Brake; Parking Brake Switch And Indicator - SSANGYONG Rexton Y200 Manual

Hide thumbs Also See for Rexton Y200:

Table of Contents

DESCRIPTION AND OPERATION

PARKING BRAKE

When the brake is firmly applied, the parking brake

should the vehicle with ample pedal travel remaining.

Check for frayed cables, rust, etc. or any condition

that may inhibit present (or future) free movement of

the parking brake lever assembly.

PARKING BRAKE SWITCH AND

When the parking brake lever is pulled out with the

ignition ON, the parking brake indicator turns on via

lever switch.

BRAKING INSPECTION

Inspect the parking brake as following;

1. Count the number of the notch sounds on pulling

out the parking brake at 19kg force.

Specified Notch

2. If the notch number is over the specified value,

adjust the notch number by the parking brake

cable adjusting nut.

3. Check the parking brake force after adjusting the

specified value.

4. If the braking force is not operated properly, check

the parking brake lever and cable and replace

them as needed.

SSANGYONG Y200

Table of Contents