Table of Contents
Advertisement
1B1-58 M162 ENGINE MECHANICAL
Removal & Installation Procedure
1. Unscrew the flywheel mounting bolt.
Installation Notice
Tightening Torque
•
Replace the bolt when the stretch side diameter
(d) of the flywheel mounting bolt is less than
8.0 mm.
•
For the stretch bolt tightening, keep the socket
wrench and Tommy-bar to be 90° and tighten
YAD1B820
as specified.
2. Remove the flywheel for manual transmission
vehicles, or the driven plate (3), and plate (2) for
automatic transmission vehicle.
3. Installation should follow the removal procedure
in the reverse order.
1st step: 40 + 5 N•m
(30 + 3.7 lb-ft)
2nd step: 90° + 10°
SSANGYONG Y200
Advertisement
Chapters
Table of Contents
