SSANGYONG Rexton Y200 Manual page 84

SSANGYONG Y200
M162 ENGINE MECHANICAL 1B1-43
Tools Required
601 589 03 43 00 Crankshaft Rear Seal Installer
Replacement Proceudre
1. Remove the radial seal with a screw driver.
Notice: Use a clean cloth not to damage the radial
seal mounting hole and the crankshaft.
2. Install the crankshaft rear seal installer 601 589
03 43 00 (2) to the crankshaft.
3. Apply the engine oil on the crankshaft rear seal
installer 601 589 03 43 00 (2).
YAD1B850
Notice: Do not use the grease.
4. Install the radial seal on the inner parts assembler.
5. Press in the crankshaft rear seal installer 601 589
03 43 00 (1) until the radial seal is stopped.
6. Check for leaks while operating the engine.