Unit Repair; Brake Caliper - SSANGYONG Rexton Y200 Manual

SSANGYONG Y200

BRAKE CALIPER

Disassembly Procedure
1. Remove the caliper assembly.
2. Separate the cylinder assembly and carrier.
•
Remove the guide rod bolt.
•
Separate the cylinder assembly and carrier.
YAD4B240
3. Disassemble the carrier.
•
Remove the pad.
•
Remove the spring.
•
Remove the guide rod and the boot.
YAD4B250
4. Remove the cylinder assembly.
•
Remove the bleeder plug.
•
Remove the bleeder plug cap.
•
Remove the piston boot.
YAD4B260
•
Using the compressed air, blow out the piston
from housing.
Notice: Do not face in the direction of removing.
•
Remove the piston.
•
Remove the piston seal.
YAD4B270
FRONT BRAKE 4B-13

UNIT REPAIR