SSANGYONG Y200
4. Propeller Shaft runout
Using a dial gauge, measure propeller shaft runout
by turning the shaft. If runout exceeds limit, adjust
the propeller shaft using a press or replace it.
YAD3C200
5. Universal joint starting torque
Specified Value
6. Major cause of vibration
•
Separation of balance weights
•
Excessive runout of the propeller shaft
•
Using the general bolts
•
Excessive wear of universal joint
•
Sticks in sleeve joint
•
Vibration is caused by front & rear universal
joint, pinion angle change and is generally broke
YAD3C210
out when the vehicle speed is around 60 ~
100km/h.
Assembly
Clean the disassembled parts and replace then if
damaged.
1. Align the alignment marks of the yoke and
assemble the spider, bearing and snap ring.
YAD3C220
PROPELLER SHAFT 3C-11
Limit
0.4 mm
3 ~ 8 kg•cm