Preceding Work : Removal of cylinder head cover
1 Chain Tensioner
2 Upper Guide Rail
SSANGYONG Y200
CYLINDER HEAD GUIDE RAIL
M162 ENGINE MECHANICAL 1B1-89
3 Upper Guide Rail Pin
4 Wrench (Special Tool)
Removal & Installation Procedure
1. Remove the chain tensioner (1).
2. Turn the exhaust camshaft to the camshaft rotating
direction using the wrench (4) and loosen the
timing chain at upper guide rail (2).
3. Pull out the upper guide rail pin from the guide
rail (2).
4. Turn the exhaust camshaft to the opposite direction
of rotation using the wrench.
5. Check for damages at the upper sliding rail and
replace it if necessary. Install the upper guide rail
pin.
6. Install the chain tensioner.
Installation Notice
Screw Plug
Tightening
Tensioner
Torque
Assembly
YAD1B2J0
40 N•m (30 lb-ft)
72 - 88 N•m
(53 - 65 lb-ft)