Table of Contents
Advertisement
1B2-28 M161 ENGINE MECHANICAL
6. Remove the intake camshaft sprocket (E20
engine).
7. Remove the camshaft adjuster (E23, M161.970 en-
gine).
Installation Notice (Flange Bolt)
Tightening Torque
Notice: The flange bolt is designed to be used
only once, so always replace with new one.
YAD1B6H0
1 Flange Shaft
2 Flange Bolt
3 Compression Spring
4 Adjust Piston
5 Camshaft Sprocket
6 Seal Cover
7 Nut
8. Remove the guide rail pin using the sliding hammer
116 589 20 33 00 (02) and the threaded pin 116
589 01 34 00 (03).
Notice: Apply the sealant on guide rail pin when
installation.
YAD1B6J0
9. Unscrew the bolts (A).
Installation Notice
Tightening Torque
Bolt (A) : (M8 X 35, 4 pieces)
YAD1B6K0
1st step: 18 - 22 N•m
(13 - 16 lb-ft)
2nd step: 60° ± 5°
22.5 - 27.5 N•m
(16.6 - 20.3 lb-ft)
SSANGYONG Y200
Advertisement
Chapters
Table of Contents
