SSANGYONG Rexton Y200 Manual page 391

1B3-122 DIESEL ENGINE MECHANICAL
11. Place the fitting tool (8) onto the chain link and
rivet the chain pins one by one.
Tightening Torque
YAD1BHS0
12. Check the riveting of chain pins and re-rivet if
necessary.
13. Remove the wire.
YAD1BHL0
14. Position the no.1 cylinder at TDC.
YAD1BC10
Notice: In this position, the marking on camshaft /
camshaft bearing cap (arrow) must also be aligned.
If the markings are not aligned, the timing chain
must be re-set and the injection pump timing has
to be set.
YAD1BC30
35 - 40 N•m
(20 - 30 lb-ft)
SSANGYONG Y200