SSANGYONG Rexton Y200 Manual page 708

SSANGYONG Y200
3. Remove the shock absorber and coil spring
assembly. Separate the lower yoke mounting bolt
and the yoke.
4. Remove the shock absorber yoke.
YAD2C170
5. Separate the shock absorber assembly with
pushing down the lower arm.
YAD2C180
Installation Procedure
1. Install the coil spring(shock absorber) assembly
and the yoke to the body. And then install the
lower shock absorber into the yoke hole and insert
the upper shock absorber to bolt hole by
tightening the nut manually.
Installation Notice
Tightening Torque
YAD2C190
2. Tighten bolts of the shock absorber assembly and
yoke. Be careful to tightening direction of the bolt
as shown.(See the arrow).
Installation Notice
Tightening Torque
YAD2C200
FRONT SUSPENSION 2C-13
40 - 60 N•m
(30 - 44 lb-ft)
60 - 70 N•m
(44 - 52 lb-ft)