SSANGYONG Rexton Y200 Manual page 729

2D-14 REAR SUSPENSION
7. Install the connecting rod to the frame bracket.
Notice: Follow the tightening length for installing
the nut.
Installation Notice
Tightening Torque
Tightening Length(A)
YAD2D260
8. Install the stabilizer bar to the axle bracket with
the mounting cap and connect the bar with the
connecting rod. And then tighten the mounting cap
bolt and nut as specified torque.
Installation Notice
Tightening Torque
YAD2D270
9. The rubbers installation should follow the
connecting order of the link rubber(packing).
Notice: Always replace a new part when there is
any wear or damage in the lever.
10. Check the shock absorber for any damage, oil
leakage or abnormal noise.
YAD2D280
38 N•m (28 lb-ft)
7 - 12 mm
30 - 45 N•m
(22 - 33 lb-ft)
SSANGYONG Y200