SSANGYONG Rexton Y200 Manual page 193

1B2-32 M161 ENGINE MECHANICAL
8. Unscrew the bolts (A).
Installation Notice
Tightening Torque
YAD1B6K0
9. Remove the belt pulley and vibration damper.
Installation Notice (Center Bolt)
Tightening Torque
YAD1B6Q0
10. Unscrew the bolts (1, 2) on timing gear case cover
and remove the timing gear case cover.
Installation Notice
Tightening Torque
Notice: Be careful not to damage the cylinder
head gas-ket.
11. Remove the radial shaft seal.
Notice: Installation note replace the seal with new
one.
YAD1B6R0
12. Clean the timing gear case cover and crankcase
sealing surface.
13. Replace the O-ring with new one and apply the
sealant on the sealing surface.
Notice: Be careful not to stain the oil chamber of
chain tensioner with the sealant.
14. Installation should follow the removal precedure
in the reverse order.
15. Warm up the engine and check for oil leaks.
22.5 - 27.5 N•m
(16.6 - 20.3 lb-ft)
1st step: 200 + 20 N•m
(148 +15 lb-ft)
2nd step: 90° ± 10°
22.5 - 27.5 N•m
(16.6 - 20.3 lb-ft)
SSANGYONG Y200