Stoplamp Switch - SSANGYONG Rexton Y200 Manual

4A-8 BRAKE SYSTEM
Pedal Height
Specification (A)
Notice: If the pedal height is not in the specified value,
loosen the lock nut and adjust the height.
YAD4A120
Pedal Free Play
Specification (C)
Notice: If the pedal free play is not in the specified
value, loosen the stop bolt and the lock nut and adjust
free play up to max. travel.
Brake Pedal Free Play
Push the brake pedal several times to discharge the
vacuum of the power booster. Measure the pedal
movement until the hardness is felt when pushing the
brake pedal by hand.
Specification
If clearance is less than the specified value, verify
that the clearance between the outer case of the stop
lamp and the brake pedal within the specified value.
If clearance is beyond on the specified value, it means
that the clearance between the clevis pin and brake
pedal arm is beyond. Check the faulty and repair,
YAD4A130
adjust as needed.

STOPLAMP SWITCH

The multi-meter connects the stoplamp switch
connector and push the plunger. When the stoplamp
switch does not connected with pushing the plunger,
the stoplamp switch is normal.
YAD4A140
177 mm (From the floor mat)
138 mm
3 - 8 mm
SSANGYONG Y200