SSANGYONG Rexton Y200 Manual page 147

1B1-106 M162 ENGINE MECHANICAL
Sealing Procedure
1. Remove the screw plug (1) and the seal.
Installation Notice
Tightening Torque
YAD1B3R0
2. Remove the steel ball from the oil gallery (4), (5),
(6) and (7) using the round bar (12, φ 6 x 700 mm).
YAD1B3S0
3. Remove the plug (8) using the screw driver.
YAD1B3T0
4. Enlarge the oil gallery at the rear of the cylinder
head to be diameter 9mm, depth 8mm.
5. Tap in the steel ball (3) from the side to the oil
gallery using the punch (13).
6. Pull out the steel ball (3) using the round bar (12).
7. Enlarge the oil gallery to be diameter 9mm, depth
8 mm.
YAD1B3U0
15 N•m (11 lb-ft)
SSANGYONG Y200