Axle Shaft Assembly (With Drum Brake) - SSANGYONG Rexton Y200 Manual

Hide thumbs Also See for Rexton Y200:

Table of Contents

SSANGYONG Y200

AXLE SHAFT ASSEMBLY

(WITH DRUM BRAKE)

1. Release the parking brake.

2. Remove the tire.

3. Remove the brake drum.

Notice: Insert the bolt into the service hole, while

tightening the both side bolts uniformly, remove

the brake drum.

4. Remove the fixing pin of parking brake.

5. After detaching the cover of parking brake,

disconnect the cable.

6. After pulling out the two plastic plug of axle shaft

flange, remove the fixing nuts of inner bracket.

REAR AXLE 3D-11

Chapters

Table of Contents