SSANGYONG Rexton Y200 Manual page 1032

5A-164 AUTOMATIC TRANSMISSION
7. Remove the front servo cover circlip.
8. Remove the front servo cover, piston and spring.
Notice: The plastic servo block is retained by the
piston return spring only.
9. Remove the adaptor housing bolts and adaptor
housing.
KAA5A520
10. Remove the pump to case bolts using a multi-hex
8 mm spanner.
11. Using the pump puller 0555-336257, remove the
pump and pump cover.
KAA5A530
12. Remove the input shaft, forward clutch cylinder,
and the overdrive shaft as an assembly,
withdrawing them through the front of the case.
13. Remove the C3 clutch cylinder and sun gears.
KAA5A540
14. Remove the front band struts. Remove the front
band.
KAA5A550
SSANGYONG Y200