SSANGYONG Rexton Y200 Manual page 75

1B1-34 M162 ENGINE MECHANICAL
Removal & Installation Procedure
1. Put the alignment marks (arrows) on the timing
chain and camshaft sprocket.
2. Unscrew the A/C bracket bolts (1) and remove the
bracket.
Installation Notice
Tightening Torque
YAD1B590
3. Remove the cooling fan and the viscous clutch.
Unscrew the three bolts from the cooling fan
bracket and remove the bracket.
Installation Notice
Tightening Torque
YAD1B700
4. Remove the timing gear case cover after
unscrewing the bolts (3) and (4) from the timing
gear case cover and the bolt (9) from the oil pan.
Notice: Be careful not to damage the oil pan
gasket.
Installation Notice
Tightening Torque
•
Apply the sealant after cleaning the timing gear
case cover surface.
•
Be careful not to stain the oil chamber of chain
tensioner with the sealant.
5. Installation should follow the removal procedure
in the reverse order.
6. Warm up the engine and check for oil leaks.
22.5 - 27.5 N•m
(16.6 - 20.3 lb-ft)
22.5 - 27.5 N•m
(16.6 - 20.3 lb-ft)
Bolt (3, 4) :
22.5 - 27.5 N•m
(16.6 - 20.3 lb-ft)
Bolt (9) :
9 - 11 N•m
(80 - 97 lb-in)
SSANGYONG Y200