SSANGYONG Y200
MASTER CYLINDER
Removal Procedure
1. Disconnect the brake lines from the master
cylinder.
Notice: The brake fluid may damage paintwork, if
spillage onto paintwork, wash with cold water
immediately.
YAD4A340
2. Loosen the mounting nut of the master cylinder
and remove the master cylinder from the power
booster.
YAD4A350
3. Remove the master cylinder.
•
Retain the master cylinder in the vice and
remove the retainer ring from the master cylinder
using the snap ring plier.
YAD4A360
•
Remove the 1st piston and 2nd piston assembly
from the master cylinder assembly.
YAD4A370
BRAKE SYSTEM 4A-17