4D-8 PARKING BRAKE
4. Remove the parking brake lever bracket mounting
bolt and remove the lever assembly.
YAD4D090
5. Remove the cable plate at the under floor.
YAD4D100
6. Disconnect the parking brake cable from the rear
brake.
Disc Type
•
Disconnect the cable from the parking brake
lever.
•
Remove the clip from the brake plate.
YAD4D110
Drum Type
•
Remove the clip from the brake plate.
•
Move the parking brake lever as shown using
driver etc. and then disconnect the cable.
7. Disconnect the cable bracket and the cable.
YAD4D120
SSANGYONG Y200