Table of Contents
Advertisement
SSANGYONG Y200
0 T
10
20
30
40
YAD1BC10
YAD1FCJ0
YAD1FCK0
YAD1BC20
DIESEL ENGINE CONTROLS 1F3-53
4. Position the no.1 cylinder at ATDC 15°.
Notice: Do not rotate the engine with camshaft
sprocket bolt or opposite direction of the engine
rotation.
5. Remove the plug (6) and seal (5) from the fuel
injection pump and collect oil in a suitable vessel.
Installation Notice
Tightening Torque
Replace the seal.
6. Install the locking screw 601 589 05 21 00 (18)
into the injection pump.
Notice: Before tightening the bolts for the injection
timing device and the camshaft sprocket, always
remove the locking screw 601 589 05 21 00 from
the injection pump and reinstall the plug.
7. Place alignment marks (arrow) on the timing chain
(12) and camshaft sprocket (15).
30 N•m (22 lb-ft)
Advertisement
Chapters
Table of Contents
