Crankcase Guide Rail - SSANGYONG Rexton Y200 Manual

1B1-90 M162 ENGINE MECHANICAL
Preceding Work : Removal of timing gear case cover
1 Guide Rail
2 Plastic Guide

CRANKCASE GUIDE RAIL

3 Guide Rail Pin
4 Tensioning Rail
Removal & Installation Procedure
1. Put the assembly mark at the camshaft sprocket
2. Remove the exhaust camshaft sprocket.
3. Remove the guide rail (1) from the guide rail pin
4. Installation should follow the removal procedure
5. Check the camshaft timing position.
and the timing chain with the paint (arrow).
(3).
Notice:
•
Replace the plastic guide (2) if damaged.
•
Connect the plastic guide (2) and the guide rail
(1) by aligning them accurately when installing.
in the reverse order.
YAD1B2K0
SSANGYONG Y200