SSANGYONG Rexton Y200 Manual page 145

1B1-104 M162 ENGINE MECHANICAL
1 Plug ........................................................ Replace
2 -
3 -
4 Main Oil Gallery
5 Screw Plug
Tools Required
102 589 12 15 00 Drift
Sealing Procedure
1. Enlarge the end of main oil gallery (4) to be
diameter of 16mm, depth of 15mm.
2. Using an M16 x 1.5 thread (tap), make the thread
at the end of main oil gallery (4).
3. Throughly clean the oil gallery with compressed
air and tighten the screw plug (M16 x 1.5) after
applying sealing bond on it.
4. Apply Loctite 270 on new plug and tighten to the
hole until the drift 102 589 12 15 00 is stopped
after inserting new plug into the drift.
YAD1B3N0
SSANGYONG Y200