Ipv6 Vrrp Commands - Dell Z9500 Command Reference Manual

IPv6 VRRP Commands

The following are IPv6 VRRP commands.
• clear counters vrrp ipv6
• debug vrrp ipv6
• show vrrp ipv6
• vrrp-ipv6-group
The following commands apply to IPv4 and IPv6:
• advertise-interval
• description
• disable
• hold-time
• preempt
• priority
• show config
• virtual-address
clear counters vrrp ipv6
Clear the counters recorded for IPv6 VRRP groups.
Z9500
Syntax
clear counters vrrp ipv6 [vrid | vrf instance]
Parameters
vrid
vrf instance
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2.(1.0)
1900
(OPTIONAL) Enter the number of an IPv6 VRRP group. The
range is from 1 to 255.
(OPTIONAL) Enter the name of a VRF instance (32 characters
maximum) to clear the counters of all IPv6 VRRP groups in
the specified VRF.
Description
Introduced on the Z9500.
Virtual Router Redundancy Protocol (VRRP)