Commissioning commands
ip address
Use this command to configure the IP address of the management port.
Syntax
ip address <ipaddr> <netmask>
Table 18: Variable definitions
Variable
<ipaddr>
<netmask>
Example
AG/configure/interface/ethernet (0/0)# ip address 10.11.12.13
255.255.255.0
ip route
Use this command to configure a static route for specifying a preferred route to a
destination.
Syntax
ip route <netaddr/mask> <gateway>
Table 19: Variable definitions
Variable
<netaddr/mask>
<gateway>
Example
AG/configure# ip route 11.12.13.14/24 10.11.12.0
52
Command Line Reference
Value
Specifies the IP address that you assign to
the management port.
Specifies the network mask that you assign
to the management port.
Value
Specifies the IP address and the subnet
mask of the destination network.
Specifies the IP address or interface name of
the gateway.
Comments? infodev@avaya.com
August 2013