System Date - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

system date

system date
Displays or modifies the current system date on the switch.
system date [mm/dd/yyyy]
Syntax Definitions
mm/dd/yyyy
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
If you do not specify a new system date in the command line, the current system date will be displayed.
•
For more information on setting time zone parameters (e.g., Daylight Savings Time), refer to the
system timezone command on page
Examples
-> system date 08/08/2010
-> system date
08/08/2010
Release History
Release 7.1.1; command introduced.
Related Commands
system time
system timezone
MIB Objects
systemServices
systemServicesDate
page 38-6
The new date being specified for the system. Enter the date in the
following format: mm/dd/yyyy, where mm is the month, dd is the day,
and yyyy is the year. For example, 08/08/2005.
38-8.
Displays or modifies the current system time on the switch.
Displays or modifies the time zone for the switch.
Chassis Management and Monitoring Commands
OmniSwitch CLI Reference Guide March 2011