1
QinQ Configuration Commands
QinQ Configuration Commands
classifier behavior
Syntax
classifier classifier-name behavior behavior-name
undo classifier classifier-name
View
Policy view
Default Level
2: System level
Parameters
classifier-name: Name of a class, a string of 1 to 31 characters.
behavior-name: Name of a traffic behavior, a string of 1 to 31 characters.
Description
Use the classifier behavior command to associate a traffic behavior with a class.
Use the undo classifier command to remove the association.
Note that each class can be associated with only one traffic behavior.
Related commands: qos policy.
In a QoS policy with multiple class-to-traffic-behavior associations, if the action of creating an outer
VLAN tag is configured in a traffic behavior, we recommend you not to configure any other action in this
traffic behavior. Otherwise, the QoS policy may not function as expected after it is applied.
Examples
# Associate the behavior test with the class database in the policy user1.
<Sysname> system-view
[Sysname] qos policy user1
[Sysname-qospolicy-user1] classifier database behavior test
1-1