Display Oam Critical-Event; Display Oam Link-Event - 3Com S7906E Command Reference Manual

display oam critical-event

Syntax
display oam critical-event [ interface interface-type interface-number]
View
Any view
Default Level
2: System level
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
Description
Use the display oam critical-event command to display the statistics on critical Ethernet OAM link
events occurred on a port.
If you do not specify the interface keyword, this command displays the statistics on the critical Ethernet
OAM link events occurred on all the ports of the switch.
Examples
# Display the statistics on critical Ethernet OAM link events occurred on all the ports.
<Sysname> display oam critical-event
Port : GigabitEthernet2/0/1
Link Status : Up
Event statistic :
-------------------------------------------------------------------------
Link Fault
Table 1-6 display oam critical-event command output description
Port
Link Status
Event statistic
Link Fault
Dying Gasp
Critical Event

display oam link-event

Syntax
display oam link-event { local | remote } [ interface interface-type interface-number ]
:0 Dying Gasp
Field
: 0 Critical Event
Port index
Link status
Statistics on critical Ethernet OAM link events
Indicates whether Ethernet OAM link error
events occurred. Refer to
Indicates whether Dying Gasp events occurred.
Refer to Table 1-2
Indicates whether Critical events occurred. Refer
to Table 1-2
1-7
: 0
Description
Table 1-2
for more.
for more.
for more.