Display Cfd Remote-Mep - 3Com S7906E Command Reference Manual

Table 1-10 display cfd mp command output description
Interface GigabitEthernet2/0/2 VLAN 100
MEP ID
MIP
Level
Service instance
Direction
Maintenance domain
Maintenance association

display cfd remote-mep

Syntax
display cfd remote-mep service-instance instance-id mep mep-id
View
Any view
Default level
2: System level
Parameters
service-instance instance-id: Specifies the service instance ID, ranging from 1 to 32767.
mep mep-id: Specifies the ID of a MEP, ranging from 1 to 8191.
Description
Use the display cfd remote-mep command to display the information of the remote MEP.
Examples
# Display the information of the remote MEP.
<Sysname> display cfd remote-mep service-instance 4 mep 10
MEP ID MAC Address
20 00E0-FC00-6565
30 00E0-FC27-6502
40 00E0-FC00-6510
50 00E0-FC52-BAA0
60 0010-FC00-6502
Field
State Time
OK 2006/03/06 02:36:38
OK 2006/03/06 02:36:38
FAILED 2006/03/06 02:36:39
OK 2006/03/06 02:36:44
OK 2006/03/06 02:36:42
1-20
Description
MP configuration of the specified VLAN on the
specified port
ID of the MEP
A MIP in the MP
MD level that an MP belongs to
Service instance to which the MP belongs
Direction of the MP
MD to which an MP belongs
MA to which an MP belongs
MAC Status
UP
DOWN
DOWN
DOWN
DOWN