Vlan Precedence - 3Com S7906E Command Reference Manual

priority pri: Specifies the 802.1p priority value corresponding to the specified MAC address. This
argument is in the range of 0 to 7.
all: Removes all the static MAC address-to-VLAN entries.
Description
Use the mac-vlan mac-address command to associate the specified VLAN and priority value with the
specified MAC addresses.
Use the undo mac-vlan command to remove the association.
Two MAC address-to-VLAN entry tables exist in a device. One table contains the MAC
address-to-VLAN entries configured with the mask keyword specified. A MAC address-to-VLAN entry
of this type describes the relationship between a group of MAC addresses and a VLAN, and a priority
value. Another table contains the MAC address-to-VLAN entries configured without the mask keyword
specified. A MAC address-to-VLAN entry of this type describes the relationship between a single MAC
address and a VLAN, and a priority value. The system adds/removes MAC address-to-VLAN entries
to/from the two tables according to your configuration.
Examples
# Associate a single MAC address 0-1-1 with VLAN 100 and 802.1p priority 7.
<Sysname> system-view
[Sysname] mac-vlan mac-address 0-1-1 vlan 100 priority 7
# Associate the MAC addresses with the high-order six hexadecimal digits being 111122 with VLAN 100
and 802.1p priority 4.
<Sysname> system-view
[Sysname] mac-vlan mac-address 1111-2222-3333 mask ffff-ff00-0000 vlan 100 priority 4

vlan precedence

Syntax
vlan precedence { mac-vlan | ip-subnet-vlan }
undo vlan precedence
View
Ethernet port view
Default Level
2: System level
Parameters
mac-vlan: Specifies to match VLANs based on MAC addresses preferentially.
ip-subnet-vlan: Specifies to match VLANs based on IP subnet settings preferentially.
Description
Use the vlan precedence command to set the order of VLAN matching.
Use the undo vlan precedence command to restore the default.
By default, VLANs are matched based on MAC addresses preferentially.
1-21