Qinq Ethernet-Type Customer-Tag - 3Com S7906E Command Reference Manual

qinq ethernet-type customer-tag

Syntax
qinq ethernet-type customer-tag hex-value
undo qinq ethernet-type customer-tag
View
System view
Default Level
2: System level
Parameters
hex-value: Hexadecimal protocol type ID, in the range of 0x0001 to 0xFFFF, but you cannot set it to any
of the protocol type values listed in
Table 1-1 Common protocol type values
ARP
PUP
RARP
IP
IPv6
PPPoE
MPLS
IPX/SPX
IS-IS
LACP
802.1x
Cluster
Reserved
Description
Use the qinq ethernet-type customer-tag command to configure the TPID value of the customer
network VLAN tags.
Use the undo qinq ethernet-type customer-tag command to restore the system default.
By default, the TPID value of the customer network VLAN tags is 0x8100.
Examples
# Set the TPID value of the customer network VLAN tags to 0x9100.
<Sysname> system-view
[Sysname] qinq ethernet-type customer-tag 9100
Table
Protocol type
1-1.
0x0806
0x0200
0x8035
0x0800
0x86DD
0x8863/0x8864
0x8847/0x8848
0x8137
0x8000
0x8809
0x888E
0x88A7
0xFFFD/0xFFFE/0xFFFF
1-4
Value