Mac Address-Based Vlan Configuration Commands; Display Mac-Vlan - 3Com S7906E Command Reference Manual

MAC Address-Based VLAN Configuration Commands

display mac-vlan

Syntax
display mac-vlan { all | dynamic | mac-address mac-address [ mask mac-mask ] | static | vlan
vlan-id }
View
Any view
Default Level
1: Monitor level
Parameters
all: Displays all the MAC address-to-VLAN entries.
dynamic: Displays dynamically configured MAC address-to-VLAN entries.
mac-address mac-address: Displays the MAC address-to-VLAN entry containing the specified MAC
address.
mask mac-mask: Displays the MAC address-to-VLAN entries with their MAC addresses in the specified
range.
static: Displays the statically configured MAC address-to-VLAN entries.
vlan vlan-id: Displays the MAC address-to-VLAN entries associated with the specified VLAN.
Description
Use the display mac-vlan command to display the specified MAC address-to-VLAN entries.
If mac-address mac-addr is specified while mask is not specified, only the MAC address-to-VLAN
entry containing the specified MAC address is displayed.
Examples
# Display all the MAC address-to-VLAN entries.
<Sysname> display mac-vlan all
The following MAC-VLAN address exist:
S: Static D: Dynamic
MAC ADDR
-------------------------------------------------------------------
0008-0001-0000
0002-0001-0000
Total MAC VLAN address count:2
MASK
FFFF-FF00-0000
FFFF-FFFF-FFFF
VLAN ID PRIO
5 3
5 3
1-18
STATE
S
S&D