3Com S7906E Command Reference Manual page 224

6300 series
Hide thumbs Also See for S7906E:
Table of Contents

Advertisement

Please wait... Done
[Sysname-Bridge-Aggregation1] port hybrid ip-subnet-vlan vlan 3
# Associate the hybrid Layer-2 aggregate interface Bridge-aggregation 1 with the IP subnet-based
VLAN 3. Among the member ports of the aggregation group corresponding to Bridge-aggregation
1,GigabitEthernet 2/0/1 is an access port and GigabitEthernet 2/0/2 is a trunk port.
<Sysname> system-view
[Sysname] vlan 3
[Sysname-vlan3] ip-subnet-vlan ip 192.168.1.0 255.255.255.0
[Sysname-vlan3] quit
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] port link-type access
Please wait... Done.
Configuring GigabitEthernet 2/0/1... Done.
Configuring GigabitEthernet 2/0/2............................. Done.
[Sysname-Bridge-Aggregation1] port link-type hybrid
[Sysname-Bridge-Aggregation1] port hybrid vlan 3 untagged
Please wait... Done.
Configuring GigabitEthernet 2/0/1... Done.
Configuring GigabitEthernet 2/0/2... Done.
[Sysname-Bridge-Aggregation1] port hybrid ip-subnet-vlan vlan 3
1-32

Advertisement

Chapters

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S7906E and is the answer not in the manual?

This manual is also suitable for:

S7910eS7906e-vS7903eS7903e-sS7902e

Table of Contents