Traffic Behavior; Traffic Classifier - 3Com S7906E Command Reference Manual

traffic behavior

Syntax
traffic behavior behavior-name
undo traffic behavior behavior-name
View
System view
Default Level
2: System level
Parameters
behavior-name: Behavior name, a string of 1 to 31 characters.
Description
Use the traffic behavior command to create a traffic behavior. This command also leads you to traffic
behavior view.
Use the undo traffic classifier command to remove a traffic behavior.
Related commands: qos policy, qos apply policy, classifier behavior.
Examples
# Create a traffic behavior behavior1.
<Sysname> system-view
[Sysname] traffic behavior behavior1
[Sysname-behavior-behavior1]

traffic classifier

Syntax
traffic classifier classifier-name [ operator { and | or } ]
undo traffic classifier classifier-name
View
System view
Default Level
2: System level
Parameters
and: Specifies the relationship between the match criteria in the specified class as logical AND. That is,
a packet belongs to the class only when it matches all the match criteria defined in the class.
or: Specifies the relationship between the match criteria in the class as logical OR. That is, a packet
belongs to the class if it matches a match criterion defined in the class.
classifier-name: Class name, a string of 1 to 31 characters.
1-7