Static Route Configuration Commands; Delete Static-Routes All - 3Com Switch 4500 Family Manual

2

Static Route Configuration Commands

The term router in this chapter refers to a router in a generic sense or an Ethernet switch running a
routing protocol.
Static Route Configuration Commands

delete static-routes all

Syntax
delete static-routes all
View
System view
Parameters
None
Description
Use the delete static-routes all command to delete all static routes.
The system will request your confirmation before it deletes all the configured static routes.
Related commands: ip route-static, display ip routing-table.
Examples
# Delete all the static routes in the router.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] delete static-routes all
Are you sure to delete all the unicast static routes?[Y/N]y
2-1