Oam Enable; Oam Errored-Frame Period - 3Com S7906E Command Reference Manual

oam enable

Syntax
oam enable
undo oam enable
View
Ethernet port view
Default Level
2: System level
Parameters
None
Description
Use the oam enable command to enable Ethernet OAM on an the Ethernet port.
Use the undo oam enable command to disable Ethernet OAM on the Ethernet port.
By default, Ethernet OAM is disabled on all Ethernet ports.
After you enable Ethernet OAM for an Ethernet port, the port attempts to establish an OAM connection
to the peer in the predetermined mode.
Related commands: oam mode.
Examples
# Enable OAM on GigabitEthernet 2/0/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 2/0/1
[Sysname-GigabitEthernet2/0/1] oam enable

oam errored-frame period

Syntax
oam errored-frame period period-value
undo oam errored-frame period
View
System view
Default Level
2: System level
Parameters
period-value: Errored frame detection interval, ranging from 1 to 60 (in seconds).
Description
Use the oam errored-frame period command to set the errored frame detection interval.
1-10