Voice Vlan Security Enable - 3Com S7906E Command Reference Manual

Default Level
2: System level
Parameters
None
Description
Use the voice vlan mode auto command to configure the current port to operate in automatic voice
VLAN mode.
Use the undo voice vlan mode auto command to configure the current port to operate in manual voice
VLAN mode.
By default, a port operates in automatic voice VLAN mode.
The voice VLAN modes of different ports are independent of one another.
To make voice VLAN take effect on a port which is enabled with voice VLAN and operates in manual
voice VLAN mode, you need to assign the port to the voice VLAN manually.
Examples
# Configure GigabitEthernet 2/0/1 to operate in manual voice VLAN mode.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] undo voice vlan mode auto

voice vlan security enable

Syntax
voice vlan security enable
undo voice vlan security enable
View
System view
Default Level
2: System level
Parameters
None
Description
Use the voice vlan security enable command to enable voice VLAN security mode.
Use the undo voice vlan security enable command to disable voice VLAN security mode.
By default, voice VLAN security mode is not enabled.
4-7