Display Voice Vlan State - 3Com S7906E Command Reference Manual

00d0-1e00-0000
00e0-7500-0000
00e0-bb00-0000
Table 4-1 display voice vlan oui command output description
Oui Address
Mask
Description

display voice vlan state

Syntax
display voice vlan state
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display voice vlan state command to display voice VLAN configuration.
Related commands: voice vlan vlan-id enable, voice vlan enable.
Examples
# Display voice VLAN configurations.
<Sysname> display voice vlan state
Voice VLAN status: ENABLE
Voice VLAN ID: 2
Voice VLAN security mode: Security
Voice VLAN aging time: 1440 minutes
Voice VLAN enabled port and its mode:
PORT
--------------------------------
GigabitEthernet2/0/2
GigabitEthernet2/0/3
GigabitEthernet2/0/4
GigabitEthernet2/0/5
ffff-ff00-0000 Pingtel phone
ffff-ff00-0000 Polycom phone
ffff-ff00-0000 3com phone
Field
MODE
MANUAL
MANUAL
MANUAL
AUTO
OUI addresses supported
Masks of the OUI addresses supported
Description strings of the OUI addresses supported
4-2
Description