Cfd Ma - 3Com S7906E Command Reference Manual

Reply from 0010-FC00-6512: sequence number=1101-43406
Reply from 0010-FC00-6512: sequence number=1101-43407
Reply from 0010-FC00-6512: sequence number=1101-43408
Send:5 Received:5
Table 1-3 cfd loopback command output description
Loopback to mac-address with the sequence
number start from sequence-number
Reply from mac-address
sequence number
Send
Received
Lost

cfd ma

Syntax
cfd ma ma-name md md-name vlan vlan-id
undo cfd ma ma-name md md-name
View
System view
Default level
2: System level
Parameters
ma-name: Name of the MA, a string of 1 to 48 characters, composed of letters, numbers or underlines,
but cannot start with an underline character.
md md-name: Specifies the name of an MD, a string of 1 to 48 characters, composed of letters,
numbers or underlines, but cannot start with an underline character.
vlan vlan-id: Specifies the ID of the VLAN where MA is in service, ranging from 1 to 4094.
Description
Use the cfd ma command to create MA(s) in an MD.
Use the undo cfd ma command to delete specified MA in an MD.
By default, no MA is created.
Note that:
Before creating an MA, you must create an MD first.
When deleting an MA, you will also delete the configurations related to that MA.
Related commands: cfd md.
Lost:0
Field
1-6
Description
Sends LBMs to mac-address with the sequence
number starting with sequence-number
Reply from mac-address
Sequence number in the LBR messages
Number of LBMs sent
Number of LBR messages received
Number of lost LBMs