Cfd Md; Cfd Mep - 3Com S7906E Command Reference Manual

Examples
# Create an MA.
<Sysname> system-view
[Sysname] cfd md test_md level 3
[Sysname] cfd ma test_ma md test_md vlan 100

cfd md

Syntax
cfd md md-name level level-value
undo cfd md md-name
View
System view
Default level
2: System level
Parameters
md-name: Name of an MD, a string of 1 to 48 characters, composed of letters, numbers or underlines,
but cannot start with an underline character.
level level-value: Specifies an MD level, ranging from 0 to 7.
Description
Use the cfd md command to create an MD.
Use the undo cfd md command to delete an MD.
By default, no MD is created.
Note that:
You can create only one MD with a specific level. MD cannot be created if you enter an invalid MD
name or an existing MD name.
When deleting an MD, you will also delete the configurations related to that MD.
Examples
# Create an MD.
<Sysname> system-view
[Sysname] cfd md test_md level 3

cfd mep

Syntax
cfd mep mep-id service-instance instance-id { inbound | outbound }
undo cfd mep mep-id service-instance instance-id
View
Ethernet interface view
1-7