07/11/02 09:43:15 61TA0000_210_0108
8. Check for continuity between the following
terminals of climate control unit connector A (28P)
and the mode control motor 7P connector.
28P:
No. 7
No. 8
*01
CLIMATE CONTROL UNIT CONNECTOR A (28P)
*1: With navigation
*2: Without navigation
Is there continuity?
YES
−
NO
climate control unit and the mode control motor.
7P:
No. 2
No. 1
Wire side of female terminals
1
GRY*
2
GRN*
1
YEL*
2
WHT*
YEL
GRY
MODE CONTROL MOTOR 7P CONNECTOR
Wire side of female terminals
−
Go to step 9.
Repair open in the wire(s) between the
9. Check for continuity between body ground and
climate control unit connector A (28P) No. 7 and
No. 8 terminals individually.
CLIMATE CONTROL UNIT CONNECTOR A (28P)
1
YEL*
GRY*
2
WHT*
GRN*
Wire side of female terminals
*1: With navigation
*2: Without navigation
Is there continuity?
−
YES
Repair short to body ground in the wire(s)
between the climate control unit and the mode
control motor.
NO
−
Substitute a known-good climate control unit,
and recheck. If the symptom/indication goes away,
replace the original climate control unit.
1
2
21-107
*02