Honda Accord 2008 Manual page 679

07/11/02 09:17:59 61TA0000_110_0360
Fuel Supply System
Fuel Pressure Relieving (cont'd)
7. Remove the quick-connect fitting cover (A)
(see page 11-366).
＊０６
8. Check the fuel quick-connect fitting for dirt, and
clean it if needed.
9. Place a rag or shop towel over the quick-connect
fitting (A).
＊０７
11-360
10. Disconnect the quick-connect fitting (A): Hold the
connector (B) with one hand, and squeeze the
retainer tabs (C) with the other hand to release
A
them from the locking tabs (D). Pull the connector
off.
NOTE:
• Be careful not to damage the line (E) or other
parts.
• Do not use tools.
• If the connector does not move, keep the retainer
tabs pressed down, and alternately pull and push
the connector until it comes off easily.
• Do not remove the retainer from the line; once
removed, the retainer must be replaced with a
new one.
A
11. After disconnecting the quick-connect fitting, check
it for dirt or damage (see step 5 on page 11-368).
12. Do the battery terminal reconnection procedure
(see page 22-89).
D
C
A
B
＊０８
E