Stage Control - Zeiss LSM 880 Operating Manual

LSM 880
5.2.7.4

Stage Control

If the Stage button is pressed, the Stage control
panel will appear (Fig. 102).
By pressing the Stop button you can interrupt any
stage movement.
The Move to Zero button will move the stage to
the current zero positions of the x and y
coordinates. The compass rose will move the stage
in the direction of the arrowheads.
Fast movement is obtained with the outer rose,
slow movement with the inner rose.
The X-Position (µm) and Y-Position (µm) display
boxes show the actual x and y coordinates. You
can edit the numbers by typing or using the
arrowheads. If numbers were altered, the first click
on the compass rose will bring the stage to the
altered position.
The Step Size (µm) display box shows the currently used step size for stage movement. The value can be
edited by typing or using the arrowheads.
The Zero Position Set button sets the x and y coordinates to 0.
If the Mark button is pressed, the current position will be stored.
Pressing the Move to button will bring the stage back to this position. By pressing Remove, the actual
displayed position will be deleted. Pressing Remove All will delete all stored positions.
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
000000-2071-464
Fig. 102 Stage control – expanded view
ZEISS
87