Zeiss LSM 880 Operating Manual page 194

ZEISS
Fig. 270
• You can also alter the position by typing into the input boxes or using the sliders or scroll arrows. If
both coordinates are changed, the system will regard this as a new alignment.
The pinhole does not move in z. The collimator for invisible light is set to the optimum position in
the factory and care should be taken to change its settings. The collimation for the Visible light is
done in the laser coupling and does not need optimization.
188
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
Automatic Pinhole Adjustment in x coarse (left) and
x fine (right)
000000-2071-464
LSM 880
10/2014 V_01